See it in action
Isopropyl Myristate IPM
Used as an emollient, thickening agent, or lubricant in beauty products and composed of Isopropyl Alcohol and Myristic Acid.
Description
Isopropyl Myristate IPM
Used as an emollient, thickening agent, or lubricant in beauty products and composed of Isopropyl Alcohol and Myristic Acid. It's often used in aftershaves, shampoos, bath oils, and various creams and lotions. It is an ester of isopropyl alcohol and myristic acid (vegetable-derived) and is a low viscosity, non-greasy emollient that tolerates wide pH range and is compatible with most surfactants. Thanks to its low viscosity and density, it has a high spreadability factor. It is easily absorbed by the skin and reduces the oily feel that some high oil content formulations can have.
Colorless oil-like liquid with little or no odor. Water-insoluble, but soluble with silicones, and hydrocarbons.
BENEFITS
- Superior emollient for non-greasy bath, body and baby oils
- Lubricant and compression aid for pressed powders
- Light & non-tacky emollient for creams and lotions. Readily adsorbed by the skin
- When used at high concentrations it gently lifts makeup and surface dirt
- Gives gloss and shine to hair
- Resistant to oxidation (does not become rancid)
- Widely used as diluent for fragrance oils.
Usage
Follow these simple instructions for best results:
Can be added to formulas as is, add to oil phase. Typical use level is from 1 - 20%. Stable when kept in a closed container at a cool & dry place. For external use only.
Creams, lotions, hand creams, shampoo, shower gels, makeup removers, powders and foundations.
Additional Notes
These are only suggested usage rates. Each formulation is different and you must test in small batches to find the percentages that work best for you. Always start by mixing in a low percentage, then gradually add until you reach your desired result.
Use this batch calculator to help you determine exactly how much you need to use of this ingredient for your next batch.
Batch Calculator
Ingredients
- ↕ % 5.00
- ↕ % 3.00
- ↕ % 2.00
Product Suggestions
Technical
Product Profile
Physical characteristics and solubility
Liquid
Clear
Colorless
No (insoluble)
0.85
< 10 cPs
5°C (41°F)
Ingredients
Common and INCI names for your product label
Isopropyl Myristate
Isopropyl Myristate (IPM)
This is a single-ingredient raw material (100% Isopropyl Myristate per the SDS) — no preservative system to declare. The copy button copies the INCI declaration.
Storage & Shelf Life
How to keep this emollient stable batch to batch
Airtight container, cool room temperature
1 Year
Keep It Sealed
Keep containers tightly closed in a cool, dry, well-ventilated place. Reseal carefully and keep upright once opened.
Store Away From Light and Ignition Sources
Keep away from direct sunlight and ignition sources. With a melting point around 5°C (41°F), it can thicken or partially solidify in cold storage — warm gently before use if needed.
Use Clean Tools
When measuring or transferring product, use clean utensils to prevent cross-contamination. Avoid reaching in with bare hands.
Test Before Scaling
Run a small batch first to confirm spreadability and stability in your specific formulation before committing to a full production run.
Quality & Compliance
Regulatory status at a glance
Not Classified
Not hazardous
> 150°C / 302°F (non-flammable in normal use)
Not Listed
May cause slight, temporary skin or eye irritation per toxicology testing — not carcinogenic or mutagenic.
Disclaimer: The technical specifications above reflect standard production values and may vary slightly between batches. Always conduct your own small-batch testing and stability studies before scaling up to production.
There are no question found.
Rating & Review
There are no reviews yet.